Serving Marlton, Maryland
Luxury Vinyl Flooring in Marlton, MD
Luxury vinyl plank and tile installed in Marlton, Maryland, from our Waldorf store and showroom: free in-home measurement, full-size samples, and our own installation crews.
Serving Marlton, Maryland
Luxury vinyl plank and tile installed in Marlton, Maryland, from our Waldorf store and showroom: free in-home measurement, full-size samples, and our own installation crews.
Marlton was built to a plan, and you can see it in the streets: orderly rows of townhomes and colonials, most of them finished with the same builder carpet and sheet vinyl packages that went into thousands of Prince George's County homes. Twenty years on, those original floors are the weak point. We replace them with luxury vinyl plank and tile that hold up to commuter life, kids, and dogs, and we measure every Marlton home free.
Our store and showroom sits in Waldorf, a short run down Route 301, and our own crews work in Marlton every week. We are Waldorf Luxury Vinyl Plank Company, licensed and bonded in Maryland, Virginia, and DC, with our Maryland work under MHIC 155221.
Townhomes ask a floor to do several jobs at once. The main level carries the entry, the kitchen, and the family room in one connected run, so we often lay a single plank from the front door to the back of the house and let the rooms read as one space. SPC rigid core is the usual pick at that level, because its rigid core stays flat and shrugs off street grit.
Upstairs, the conversation changes. Bedrooms and halls above living space benefit from WPC, the softer and quieter core that takes the chill off in January and softens footsteps between floors. Bathrooms and laundry rooms get stone look luxury vinyl tile, which handles daily water and ends grout scrubbing.
We carry full-size samples from COREtec, LifeProof, Shaw, and Mohawk, with wear layers matched to the household: 12 mil for quiet bedrooms, 20 mil for family spaces, 22 mil for big dogs and heavy traffic. Replacement work includes removing the old surfaces and correcting the subfloor first, because a floating floor announces every dip left beneath it.
A Marlton townhome still had its original builder carpet on the main level, worn thin at the entry and stained along the path to the kitchen. We removed the carpet and kitchen sheet vinyl, leveled the slab where it had settled near the slider, and ran one warm oak SPC plank across the entry, living room, and kitchen.
Marlton pricing follows the published ranges. SPC rigid core: $7 to $12 per square foot installed. Luxury vinyl tile and WPC: $6 to $11 per square foot installed. Removing old flooring and preparing the subfloor adds $1 to $3 per square foot where it applies.
A single room in Marlton usually totals $1,200 to $3,400, and a kitchen usually totals $1,800 to $4,600. A whole main level typically runs $6,500 to $14,500, and a whole home project generally ranges from $11,000 to $24,000. Those figures cover product and professional installation, and your free in-home measurement turns them into one exact written figure for your rooms, with removal, leveling, and material shown as separate lines.
We sell and install with our own crews, so one company is responsible from the first measurement to the final walk through. We start with a free in-home measurement and a subfloor check, then bring the decision to full-size samples you can stand on and borrow to check against your cabinets in your own light.
We are veteran friendly and serve as a national federal government dealer, which matters in a community full of federal commuters. Our quote lists the product, underlayment, transitions, and trim by name before any material is ordered, so there are no surprises between the written figure and the finished floor.
Plan on $7 to $12 per square foot installed for SPC rigid core and $6 to $11 per square foot installed for WPC or stone look tile. A single room usually totals $1,200 to $3,400 and a whole main level $6,500 to $14,500. The free measurement converts those ranges into one exact figure for your home.
In most Marlton townhomes, yes. A click lock plank can carry the entry, living room, and kitchen in one continuous run, with transitions only where the construction changes. We confirm the subfloor is flat enough during the free measurement and level any settled spots before installation.
Rules vary by community, and some associations in planned communities like Marlton ask about flooring changes, especially in attached homes where sound travels between units. Check your association documents before we order material; the quieter WPC core and the right underlayment help upstairs rooms in shared-wall homes.
SPC is the firmer, more dent resistant core and suits main levels, kitchens, and busy entries. WPC is softer and quieter underfoot and suits bedrooms and upper halls. Many townhome projects use both, SPC below and WPC above.
Most main levels take two to three days on site once removal and subfloor prep are included, and a single room is often finished in one day. Rooms can usually be walked on the same evening they are completed. We map out which rooms happen on which day before work begins.
Yes. Removal of carpet, laminate, and sheet vinyl is part of our replacement scope, and we inspect and correct the subfloor once the old surface is up. The removal and prep appear as their own lines in your written quote.
Tell us about the rooms you want floored and the floors you have now. We read every request that comes in and respond with the next steps, starting with a free in-home measurement and full-size samples you can see in your own light.
Licensed and bonded · MHIC license 155221 · Veteran friendly. Prefer to talk it through first? Send the form and we will call you back at the number you give us.